Bronto S35 MDT Truck Mounted Boom

Used Truck Mounted Booms/Hoists for sale

Technical Specifications for Bronto S35 MDT

• Working height 35.0 m
• Height to working cage floor 33.0 m
• Working outreach 23.3 - 25.8 m
• Outreach to cage corner 22.6 - 25.1 m
• Safe working load 360 - 120 kg
• Rotation +-280deg
• Transport height (depending on chassis) 3.4 m
• Transport length (depending on chassis) 8.9 m
• Transport width 2.5 m
• Outrigger width (C/C), front 5.4 m
• rear 5.4 m
  Total weight, (without chassis) 9.3 to
• Working cage 0.9 x 2.0 x 1.1 m
• GVW 16 - 18 ton
  

Standard Features

• Electro-hydraulic control system
• Bronto+
• Joystick control levers for boom movements in the cage, push button controls at the turntable
• Electro-hydraulic cage levelling system
• Doubled safety system
• Slow speed movement before meeting outreach limit
• Safety switches for extension chains
• Engine start prevention gear connected
• Automatical interlock system to prevent the lifting of the booms when the outriggers are in transport position
• Signal lights for outriggers and boom transport position in driver's cab
• Back-up system for hydraulics by battery pump
• Push button in the cage for sound signal
• Turntable rotation approx +-280deg electrically limited
• Changeable working cage
• Cloth covered turntable
• Aluminium decking with hot dip galvanized frame
• Ladder type step with railing (one side)
• Outrigger ground pads with brackets
• One locker at the rear of the vehicle with hinged door for outrigger control panel
• Flashlights to outriggers
• Side lights (yellow)
• Wheel chocks with brackets
• Plastic mudguards for rear axle
• Mounting on chassis