|
Specifications for Snake 189 Smart
| Platform: |
aluminium, dim.1300 x 700 x h 1100 |
| Pantograph angle: |
0*/+60* |
| Maximum gradient: |
3% |
| Max. working height: |
19m |
| Slewing Platform: |
hydraulic 90* right + 90* left |
| Slewing turret: |
360* (not continuous) |
| Max. wind speed: |
12 m/sec |
| Max. working outreach: |
10.6-8.5 m |
| Platform levelling: |
hydraulic with closed circuit |
| Controls: |
proportional, hydraulic type |
| Electric system voltage: |
12V |
| Min.installation: |
PTT 3.5 ton |
| Boom: |
telescopic, all steel |
| Oil tank capacity: |
40L |
| Max manual force: |
40daN |
| Outriggers: |
type A on extensible supports |
| Boom angle: |
-20*/+ 80* |
| Pump: |
12L |
| Load capacity: |
120-200 kg |
| Pantograph: |
double bar, all steel |
| Circuit pressure: |
190 bar |
| No. operators: |
1-2 |
STANDARD SAFETY EQUIPMENT
- Priority of platform controls
- Locks for the safety belts on the platform
- Emergency push-button with engine stop
- Hand pump for the emergency descent of the platform
- Self-locking device on rotation
- Aerial structure locking till the stabilisation is complete
- Thermal protections on the electric system
- Protection with pressure relief valve on the hydraulic system
- Overcentre lock valves on all the cylinders
- Extended outriggers check light
- Use and maintenance handbook
|
Used Machines
Forklift/Teleporter Service